Price stated excl. VAT. Linjator box not included.


ENKEL BOKS RJ45 is a full-featured interface system that combines high functionality with simplified cabling. With one UTP cable (TIA/EIA-568B) from the access controller to the box and a separate power cable, the solution provides a more efficient and cost-saving installation without compromising performance. Using decentralized power also removes limitations related to cable spacing, which provides greater freedom and flexibility in the installation. Power can be looped (loop-through) from door to door for further reduction in materials and time. The solution has been developed with regard to requirements in TEK17 for doors and escape routes (including §11-13, §11-14 and §12-13), including fire override and correct configuration of locks in escape routes.
 Main features and benefits
 
 
 All signals from the access controller are routed in RJ45 wiring (T568B) and are used as control signals for built-in relays in the SINGLE BOX RJ45. This includes, among other things: 
  
 
   
 Fire alarm control relay
 
   
 Night lock relay (NC)
 
   
 Main lock control relay — a specialized relay with a capacity of 8 A is used here, ensuring reliable operation of locks. This relay is designed for a long service life, with an expected operation of up to 25 years.
 
  
 
 
 
 
 Separate relay dedicated to the Elbow Switch input signal, which enables simultaneous use of the Elbow Switch both as a REX control signal for access control and as a signal for automatic door opening (AUTO).
 
 
 Independent voltage levels for control and lock (e.g. 12 V control / 24 V lock – or vice versa) via universal relay coil 10–35 V and separate lock voltage.
 
 
 Reader support: OSDP (RS-485) and Wiegand can be connected directly via the box for stable and flexible connectivity.
 
 
 Decentralized power supply with separate cable up to 2×1.5 mm², which can be looped from door to door for easier installation and lower costs.
 
 
 Simplified cable management and standardized termination (TIA/EIA-568B) provide faster commissioning and fewer misconnections.
 
 
 Test and status indicators on the circuit board for quick verification during installation, as well as tamper input for secure operation.
 
 
 Robust dimensioning: up to 5 A on the circuit board's copper tracks (depending on load and terminal type) for reliable operation of door locks and actuators.

 Note: RJ45 is used here as a multi-wire interface (not Ethernet).